Home Performance with ENERGY STAR®
Frequently Asked Questions (FAQs)

Homeowners are spending more money than ever to heat and cool their homes. Many homeowners are not getting the comfort they are paying for because homes often suffer from cold spots, rooms that are too hot or too cold, ice dams, drafts, building rot, and mold and mildew problems. They may all be common signs that the house is not properly insulated and air sealed or that the heating system is improperly balanced, or that moist air in the house is not being effectively controlled. In fact, most homes waste energy so much that it is the equivalent of leaving a 3’ x 3’ window open all year round.
1) What is Home Performance with ENERGY STAR?
Home Performance with ENERGY STAR is a comprehensive home improvement program designed to save homeowners up to 40 percent on their monthly energy bills. It is sponsored by the Long Island Power Authority (LIPA) and supported by the Environmental Protection Agency (EPA). Each participating contractor has earned certification through the Building Performance Institute (BPI), a national resource for building science technology that sets standards for assessing and improving the energy performance of homes. BPI Accredited Home Performance with ENERGY STAR contractors use the most advanced state-of-the-art equipment to test the home and identify energy efficiency improvements.

2) What is a Comprehensive Home Assessment?
A comprehensive home assessment is the first step towards improving a home’s efficiency, reducing energy bills, and increasing comfort, health and safety. The assessment will evaluate heating and cooling equipment, insulation levels and air infiltration. The BPI Accredited contractor will explain to the homeowner what improvements can be made, as well as the cost of making the improvements. During the assessment, the contractor will perform a number of tests on the home using the latest diagnostic equipment and building science principles to determine what areas will benefit from energy efficiency upgrades. Specifically, the contractor will test the home for air leakage using a blower door and duct blaster to measure for problems in the duct system for air distribution,and will look for opportunities to improve the home’s insulation, heating and cooling system, windows, appliances and lighting. Contractors also use a carbon monoxide analyzer to test before and after any energy efficiency improvements.

3) Why do homes develop mildew and mold?
Mold and mildew can occur when warm, moist air condenses on a cold surface. Many building products will support mold growth, especially wood-based products. Mold in a home can often go undetected since it tends to occur on the coldest surfaces, such as closets on outside walls (especially when the walls are improperly insulated), behind furniture, and in attics and basements. The presence of mold in homes is typically a sign of under ventilation, uncontrolled air movement or excessive humidity levels. A BPI Accredited Home Performance with ENERGY STAR contractor can perform diagnostics that indicate air leakage paths, insulation conditions and humidity levels to determine the home’s particular needs. Since molds are usually caused by a combination of problems, a comprehensive home assessment is recommended to effectively develop a plan of action to help remedy the problem.

4) Why do ice dams form on the roof?
Ice dams form when the snow on the roof melts and re-freezes, and the ice backs its way under the roof shingles. Further melting can occur at this point, causing water leaks and damage. A major reason for ice melting on the roof is warm air from the home leaking into the attic, moving past the insulation and warming the underside of the roof. This can happen even when there are thick amounts of insulation in your attic, if the warm air is allowed to by-pass the insulation via air gaps and leaks between the attic and heated living spaces below. This means insulation alone is not always enough to correct the problem. Stopping air leaks combined with proper insulation and ventilation are the three major components required to remedy this problem. A BPI Accredited Home Performance with ENERGY STAR contractor using special testing equipment, such as a blower door, is a proven way to locate and measure air leakage in your home. Often times the air leakage component is missed because conventional contractors are not performing blower door diagnostics.

5) What indicates that a heating system is running inefficiently and unsafely?
The telltale signs of an improperly functioning heating system include varying temperatures from room to room, the house feels too hot or too cold, and the heating unit cycles on and off excessively. In addition, homes with forced air heating systems use a duct system to distribute air. Most ducts, whether old or new, have cracks, gaps and holes that waste about 25 percent of the treated air. In addition, it’s important to have fuel-burning equipment like fireplaces, water heaters, dryers, and furnaces checked for proper venting to avoid harmful gases, including carbon monoxide, from entering your home.
6) Can programmable thermostats help lower costs?
Properly controlling a thermostat can help reduce your heating and cooling costs. Programmable thermostats can automatically adjust the temperature at pre-determined times while the homeowner is away from the house or sleeping. Residents enjoy greater comfort conveniently, without wasting time or energy. However, only a whole house approach can result in maximum energy savings.

7) Why is insulation important?
Whether a home is old or new, inadequate or improperly installed insulation can lead to high energy costs, uncomfortable rooms and structural problems. Proper insulation levels slow the movement of heat through your walls, floors and ceilings, keeping you warmer in the winter and cooler in the summer. A BPI Accredited Home Performance with ENERGY STAR contractor will check insulation levels and make sure it is installed properly, as well as make sure all the holes, cracks and gaps in the home are sealed for air leakage.

8) Why is ventilation important?
Ventilation is a vital component to every house. Ventilation systems are important for healthy, safe and comfortable living space. These systems help remove moisture from the air to help avoid mold, mildew and condensation problems. Ventilation also helps eliminate potential indoor air pollutants, cooking odors or stale, stuffy air. A house has to “breathe” and proper ventilation can help ensure your home has a steady, healthy amount of fresh air.

9) Why is air sealing important?
Insulation alone is not always enough to make sure your home is energy efficient. Stopping air leaks combined with proper insulation and ventilation are the three major components required to ensure a home is tight while providing a sufficient supply of fresh air. A Home Performance with ENERGY STAR contractor using special testing equipment, such as a blower door, can locate and measure air leakage.

10) Are the condition of the doors and windows important?
It’s important to have well-insulated, high-performance windows and doors. Homeowners will see and feel the difference through improved comfort, reduced condensation and lower utility costs. Look for the ENERGY STAR label to identify the most efficient windows, skylights, and sliding glass doors.

When buying new windows, consider U-value and Low-E coatings. U-value is the measure of the window’s ability to insulate. Lower U-value means that less heat flows through the windows. Low-E (low emissivity) window coatings are thin and transparent, permitting visible light to pass through, while effectively reflecting radiation, which keeps your home cooler in the summer and warmer in the winter.

11) How can a homeowner improve the efficiency of a water heater?
Typical recommendations include insulating an existing tank, replacing the existing tank with a more efficient model using the same fuel or replacing the existing tank with another fuel source, usually natural gas or a heat pump water heater. If the hot water pipes are not insulated in a cold basement, a BPI Accredited Home Performance with ENERGY STAR contractor will often recommend insulating the first six feet of pipe.

12) Why is health and safety testing important when conducting home energy improvements?
BPI Accredited Home Performance with ENERGY STAR contractors have been trained to inspect and test combustion appliances such as heating equipment, ovens and water heaters for proper performance to ensure safe operation. This evaluation includes measurement of carbon monoxide (CO) produced by the appliance and testing to ensure that potentially dangerous combustion gases are not introduced into the home. Home Performance with ENERGY STAR contractors test for combustion safety problems before and after performing any energy improvements to your home.

13) What should consumers look for when buying new appliances?
When it’s time to buy or replace home appliances, be sure to look for models with the ENERGY STAR. ENERGY STAR qualified appliances—clothes washers, refrigerators, dishwashers, room air conditioners, and home electronics-- incorporate advanced technologies that use 20 to 55 percent less energy than standard models, saving you money on utility bills while reducing air pollution.

For example, an ENERGY STAR qualified clothes washer uses up to 55 percent less energy and saves about 7,000 gallons of water each year. Many dishwashers with the ENERGY STAR are built with innovative technology to clean better while using less energy and water. And homeowners can reduce electricity consumption by 40 percent or more with an ENERGY STAR qualified refrigerator compared to 2001 models. That’s a savings of $75 per year.
14) How can consumers improve the lighting in their homes?
When replacing light bulbs or installing new light fixtures, consumers will save time and money when they choose models that have earned the ENERGY STAR. According to the U.S. Environmental Protection Agency (EPA), today’s ENERGY STAR qualified compact fluorescent light bulbs (CFLs) equal or surpass the quality of light found in conventional incandescent bulbs. CFLs use two-thirds less energy and last up to 10 times longer. ENERGY STAR qualified lighting and fixtures are available in a variety of styles and sizes.

15) What options are available to help finance Home Performance with ENERGY STAR improvements on Long Island?
Low-interest loans or financial incentives are available to help pay for home improvements made by BPI Accredited contractors participating in the Home Performance with ENERGY STAR program. There are no application fees or closing costs and the loans do not require a down payment. Additional assistance may be available if you meet certain income eligibility requirements.

16) What is the best way to select a contractor?

How can I find out more information?

You can start by requesting to speak with a licensed local home improvement professional in your area to learn even more about your home improvement options. Go to our map to get started now.